News Category
Contact Us
等待后臺更新
Hybrid ceramic bearings may be less common, but the hybrid ceramic bearing the main configuration is composed of inner and outer rings of bearing steel / stainless steel and +PA66/ stainless steel +2RS/ZZ ceramic ball retainer formed by the combination of. Hybrid ceramic bearing has the following four advantages in the use of process.
(1)、耐溫高,陶瓷球熱膨脹系數小,在高溫環境下不會因為溫度的原因導致軸承球膨脹,這樣大大提高了整個軸承的使用溫度,普通軸承的溫度在160度左右,陶瓷球的可以達到220度以上。
(1), high temperature resistance, low thermal expansion coefficient of ceramic ball, not in the high temperature environment because of the temperature causes the bearing ball expansion, thus greatly improving the use of temperature of the bearings, plain bearings and temperature of 160 degrees, Tao Ciqiu can reach above 220 degrees.
(2)、轉速高,陶瓷球具有無油自潤滑屬性,陶瓷球摩擦系數小,所以陶瓷球軸承具有很高的轉速.計統計采用陶瓷球的軸承是一般軸承的轉速1.5倍以上的轉速。
(2), high speed, ceramic ball with oil-free self-lubricating properties, ceramic ball friction coefficient is small, so the ceramic ball bearings with high speed. Bearing statistics with ceramic balls are generally bearing speed more than 1.5 times the speed of.
(3)、壽命長,陶瓷球可以不加任何油脂,也就是說即使油脂干掉,軸承還是可以運作的,這樣就避免了普通軸承中因為油脂干掉導致的軸承過早損壞現象的發生.據我們測試以及一些客戶的反饋使用陶瓷球后的軸承的使用壽命是普通軸承的2-3倍。
(3), long service life, ceramic ball without any oil, that is to say even if oil bearing or kill, can work, thus avoiding the common bearing occur because of premature bearing grease to kill the damage caused by the phenomenon. According to our test and service life of bearing some customer feedback after use ceramic ball is 2-3 times that of ordinary bearing.
(4)、絕緣.采用陶瓷球的軸承,可以使軸承的內外圈之間絕緣,因為陶瓷球是絕緣體,在軸承的內外圈之間用陶瓷球,就可以達到絕緣的效果.這樣就使軸承能夠在導電的環境下使用了。這也是混合陶瓷軸承最大的優點。
(4), insulation bearing with
ceramic balls, can make the insulation between the inner and
outer bearing ring, because ceramic
ball is an
insulator, in between
the bearing outer
ring with ceramic
ball, can achieve the insulation effect. This makes the bearings can be used in a conductive environment. This is also the largest hybrid advantages of
ceramic bearing.